Factory-installed power cord with plug
Field convertible from Natural Gas to Propane (kit included)
Fully modulating, non-condensing, with copper heat exchanger
Up to 6.6 GPM max flow rate
Built-in safety features include freeze protection, manual reset hi limit (up to 194F), overheat cut-off fuse, inlet & outlet thermistors (for constant temperature monitoring), air-fuel ratio rod and flame sensor
Flue vented using Cat. III stainless steel (such as Z-Vent or NovaVent)
Electronic ignition - no pilot light
Temperature controller on front panel
Wall-mounting design with integrated brackets
AHRI certified, Low-Lead compliant, Low Nox (SCAQMD Rule 1146.2 - California & Texas, NG models only)
Shower Capacity: 2.5 - 1.5 Showers (3 GPM @ 75°F rise; 4.5 GPM @ 50°F rise; 6.6 GPM @ 35°F rise)
Min Flow: 0.4 GPM
Gas Input (Min - Max): 15,000 - 199,000 BTU/h
Fuel Type: Natural Gas (4 - 10.5 WC pressure) or Propane (8 - 14 WC pressure) - LP conversion kit included
UEF: 0.81
Hot & Cold Water Connections: 3/4" NPT
Gas Connection: 3/4" NPT
Flue/Exhaust: 4" (up to 60ft of pipe length equivalent, max. 6 elbows) - Cat III Stainless Steel only
Combustion Air Intake: 3" (up to 60ft length, 6 elbows max) - Flexible Aluminum Duct, Cat. IV (PP, PVC or CPVC) or Cat. III (St. Steel)
Installation Altitude: 0 - 2,000 (de-rate for higher elevations, up to 10,100ft max - see manual for details)
Power Supply: 120V, 60Hz (factory wired plug-in cord)
Consumption: 54W Operation, 2W Stand-by, 96W Freeze protection
Dimensions: 13-3/4" Wide x 22-1/2" High x 10" Deep
Weight: 37.5 lbs
Image 1 of 5
Image 2 of 5
Image 3 of 5
Image 4 of 5
Image 5 of 5